TNC-AS Metallographic Pretreatment
INQUIRYModel
TNC-200AS, TNC-230AS, TNC-255AS
- Product Feature
- Product Specification
 |
Automatically function In automatic cutting mode, the equipment will automatically sensor the end of the processing. It will make sure that after cutting the cooling function can still work, and it will make a sound when finishing cutting. |
| All machines use high protection glass To avoid several factors resulting in the tube cracked, the front of the cutting room used the high protection glass. Not only safe but also keep the glass clean, so that the user can see clearly, it helps to increase working efficiency and make sure the sample cutting is successful. |
 |
 |
Consumables Compatibility TNC cutting machines can fit several international brands. According to different cutting requirements, choose the material that is suitable for the machine. If you want to purchase any consumables, please contact us. |
| Intelligence Feeding Function (optional) Depends on the different cutting features of the material, use the correspondence of current value and cutting load to process personify cutting back and forth. By using this function can cut bigger and stronger material, and extend the service life of the cutting disk, lower down the cost. |
 |
 |
Small and Powerful Screw Increaser Fixture It's a screw increaser suitable for small products. The machine is made by the whole metal. Tough and useful, after the heat treatment, not only the machine function ability and also protect it become deterioration. |
Easy to maintain
For the TNC series cutting machine, we pack the cutting system in the stainless protection device will reduce the need of maintenance. Only need to add the oil to the screw. You can also call TN service line to purchase the regular maintenance service, our specialist will assist you.
Magnetic Filter Device(optional)
It can reduce the quantity of cleaning the water box, and reduce the left over to make the liquid become deterioration. It can extend the machine using time and cost down the value. Also, it will reduce the choking problem of the cooling system.
All Machine are Certificated by CE
Safety is our first concern, whether is electrical safety or doing the daily cutting job. We follow an international safety CE system, to make sure our users are safe.
| ITEM | Model/Specification Description | |||
|---|---|---|---|---|
| TNC-200AS | TNC-230AS | TNC-255AS | ||
| structure | Standing | |||
| Transmission system | form | High efficiency induction motor belt drive mechanism | ||
| Cutting Motor | 1 HP (60/50Hz) | 2 HP (60/50Hz) | 3HP (60/50Hz) | |
| Rotational Speed | 2990 (60Hz) | 2990 (60Hz) | 2750 (60Hz) | |
| (RPM) | 2960 (50Hz) | 2960 (50Hz) | 2720 (50Hz) | |
| Cutting sheet specifications | Outside diameter of cutting disc | Ø200mm | Ø230mm | Ø255mm |
| Inside diameter of cutting disc | Shaft diameter Ø31.75(*Ø25.4) | Shaft diameter Ø31.75(*Ø25.4) | Shaft diameter Ø31.75(*Ø25.4) | |
| Sample clamping | Fixture type | Thread locking fixture | ||
| Opening distance adjustment | Slider to adjust the distance between movable jaws | |||
| Locking method | Thread locking, tool adding force | |||
| Opening (mm) | Maximum 72mm | |||
| X Movement (mm) | Maximum 39mm (handwheel adjustment) | |||
| Cutting Height (mm) | 62mm | 82mm | ||
| Total swing length | 488mm | |||
| Control System | Panel form | Waterproof IP55 Physical Hard Button Panel | ||
| Features | LED digital display board: 1. Feed speed mm/min 2. Load current ampere value A 3. Life record 4. Intelligent feed reciprocating times | |||
| Automatic feed speed adjustment | ||||
| Manual automatic function start and stop | ||||
| Intelligent feed function setting (optional) | ||||
| Cooling system function start and stop | ||||
| Complete the three modes of buzzer reminder: 1. Turn off 2. Unlimited buzzer reminder 3.30 seconds buzzer reminder | ||||
| Magnetic filter system function start and stop (optional) | ||||
| Feeding device | Tool setting method | Visual or (optional laser tool setting device) | ||
| Manual advance and retreat | Use advance hand to lose | |||
| Feeding Speed | Freely set the feed speed and cutting end point, automatic feed | |||
| Auto retract | After the worktable reaches the cutting end point, it will automatically return to the cutting origin at full speed, and then beep | |||
| Smart feed | Optional (Smart current reciprocating cutting, please refer to the description of smart feed) | |||
| Manual/automatic switch | Patented manual automatic integrated knife feed and manual input (switching time is about 1 second) | |||
| Workbench stroke | 230mm | |||
| Lighting device | Type | IP67 high brightness LED lamps | ||
| Safety function | System self-protection function | In addition to passive overload protection, self-protection function (load upper limit) can be set | ||
| Current overload | The feed function stops and the worktable returns to the cutting origin | |||
| emergency button | In an emergency, press the emergency stop button to stop all functions | |||
| Observation window | Safety tempered glass | |||
| Door safety device | Lifting type, pneumatic support anti-pinch | |||
| After closing the hatch correctly, the spindle function cannot be started | ||||
| Spindle action stops when opening hatch during operation | ||||
| Overload protection | Set the overload current and motor overload protection device | |||
| Cooling device | Volume | 50L | ||
| Circulating Pump | 1/8 HP | |||
| Circulating water | 48L / min | |||
| Cooling water hose | 2 | |||
| Cleaning hose | 1 | |||
| Filter method | Filter and sedimentation tank | |||
| Magnetic filter | Optional | |||
| weight | 25kg | |||
| size | D320*W500*H360 | |||
| Electricity | AC 220V / 380V 50HZ/60Hz 3P, Power cord length 3500mm | |||
| Power | 1000w | 1700w | 2500w | |
| Machine | APPEARANCE | D900*W800*H1300mm | ||
| Weight | 257kg (220V) | 261kg (221V) | 264kg (222V) | |
| 264kg (380V) | 268kg (380V) | 271kg (380V) | ||
| Standard Accessories | Cutting Disc*2pcs、Coolant oil (2L)*1btl、Toolbox*1set | |||